프로젝트 설명

매트리스 쿠션 평가 시스템

ST-2XL – Comfort Test System

매트리스 평가 시스템, 쿠션 평가 시스템, 좌석 평가 시스템
ST-2XL-Comfort Test System, Seat Test System, Thermal System

Product

혁신적인 ST-2XL Comfort Test System은 사내 테스트 절차를 간소화하고 고급 열 계측 테스트의 필요성을 평가하는데 도움이 되기 위해 개발된 장치입니다.
좌석, 쿠션, 매트리스 등의 열 특성 및 수분 관리 특성을 평가할 수 있으며 이러한 재료들의 내부 공법에 따른 효과를 평가 할 수도 있습니다.

제품특징

  • 다공성 금속 발한 피부 Insert 탄소 섬유/에폭시 복합체
  • 단일 영역 표준 구성
  • 쉽게 사용하기 위한 편하고 가벼운 장비
  • 압축 무게 포함 (총40파운드=18kg)
  • 통합 냉각 기능으로 온열 좌석 평가
  • ST-2XL 매트리스 같은 두꺼운 재료를 테스트 하기 위한 높은 전력 출력 기능
  • 시스템 전용 PC 및 ThermDAC 소프트웨어 포함

Features

  • Evaluate the thermal properties and moisture management characteristics of mattresses, cushions, and a variety of bedding and seating materials.
  • Lightweight and portable yet ruggedly built, the ST2-XL is designed to simulate bed/seat compression rates that are equivalent to a 175 pound person.
  • Thermally conductive carbon fiber test zone and guard, with ultra-stable resistance wire heating for accurate and uniform heat flux.
  • Integrated sweating skin system with computer-controlled fluid supply.
  • Fluid supply includes UV light and filter for improved reliability and reduced maintenance.
  • Test zone number, size, and shape can be customized for specific research needs or customer requirements.
  • Skin temperature is measured by by high temperature coefficient resistance wire sensors embedded beneath the surface. Optional DHS sensor technology is also available.
  • System includes a Dell laptop PC with exclusive ThermDAC control software featuring full thermal control, fault detection, real-time data display, and data logging capabilities.

Specifications

Standard
• 15” x 15” square active surface, suitable for represention of seated anatomical contours
• Carbon-fiber construction with distributed resistance wire sensors
• Two temperature controlled guard zones
• Ultra-stable resistance wire heating
• High/Low power control for faster heat-up and more accurate testing
• One computer-controlled sweating zone
• Network of pores across the test zone are used to deliver water to the skin surface
• Includes sweat distribution pump, reservoir, UV water purification, and connection tubing
• 10 interface temperature/humidity sensors
• One ambient RH sensor
• Signal conditioning electronics
• Power and control cabling
• Dell laptop PC with ThermDAC control software
• Operator manual and One year warranty

Options
• DHS dynamic sensor technology
• Additional or customized sweating zones

Range / Performance / Accuracy
• 800 W/m² maximum power output
• ±0.1°C thermal accuracy
• ±1% power measurement accuracy
• ±3% relative humidity measurement
• Variable (10°C – 40°C) temperature setpoints
• 0–1000 ml/(hr-m²) perspiration rate

Model Information
• Device Dimensions: 18”x18”x3.25”H (46 x 46 x 9 cm H)
• Power Requirements: Single phase, 50/60 Hz, 85-265 VAC
• Maximum nominal current: 2.0 kVA

ThermDAC Control Software
ThermDAC is a user-friendly Windows-based application providing full device control, fault detection, data logging and analysis capabilities. System configuration and calibration can also be carried out within ThermDAC.
• Automatic steady-state detection
• Define non-standard test conditions and custom tolerance criteria
• View multiple device and ambient variables on a single graph screen
• Apply real-time statistical functions to test data over any user-selected time range

Service
Please ask about these popular service options:
• Startup installation and training
• Extended Warranty
• Annual Service Care Package – a periodic maintenance and service contract designed to keep your Thermetrics equipment calibrated and in top operating condition